1756-IF6I | Allen Bradley Analog Input Module
1756-IF6I | Allen Bradley Analog Input Module

1756-IF6I | Allen Bradley Analog Input Module

0 Review(s)
Availability: Estimated Lead Time: 6 - 8 Weeks
Part Number: 1756-IF6I
USD1,533.00
Retail Price:USD1,804.00
You Save:USD271.00(15%)
Write a Review
Part Number: 1756-IF6I

Technical Specifications
  • Inputs: 6 individually isolated
  • Input range:
    ?10.5V
    0...10.5V
    0...5.25V
    0...21 mA
    (over-range indication when exceeded)
  • Resolution:
    16 bits
    10.5V: 343 V/bit
    0...10.5V: 171 V/bit
    0...5.25V: 86 V/bit
    0...21 mA: 0.34 A/bit
  • Current draw @ 5.1V: 250 mA
  • Current draw @ 24V: 100 mA
  • Total backplane power: 3.7 W
  • Power dissipation, max:
    Voltage: 3.7 W
    Current: 4.3 W
  • Thermal dissipation:
    Voltage: 12.62 BTU/hr
    Current: 14.32 BTU/hr
  • Input impedance:
    Voltage: > 10 M
    Current: 249
  • Open circuit detection time: Positive full scale reading within 5 s
  • Overvoltage protection, max:
    Voltage: 120V AC/DC
    Current: 8V AC/DC (with on-board current resistor)
  • Normal mode noise rejection: 60 dB @ 60 Hz?
  • Common mode noise rejection:
    120 dB @ 60 Hz
    100 dB @ 50 Hz
  • Channel bandwidth: 15 Hz (-3 dB)?
  • Settling time: Settling time?
  • Calibrated accuracy 25 ?C (77 ?F): Better than 0.1% of range
  • Calibration interval: 6 months
  • Offset drift: 2 V/?C
  • Gain drift with temperature:
    Voltage: 35 ppm/?C, 80 ppm/?C max
    Current: 45 ppm/?C, 90 ppm/?C max
  • Module error: 0.54% of range
  • Module input scan time, min:
    25 ms min floating point
    10 ms min integer?
  • On-board data alarming: Yes
  • Scaling to engineering units: Yes
  • Real-time channel sampling: Yes
  • Data format: Integer mode (left justified, 2s complement) IEEE 32-bit floating point
  • Module conversion method: Sigma-Delta
  • Isolation voltage:
    50V (continuous), basic insulation type, input channels-to-backplane, and input channel-to-channel
    Routine tested at 1350V AC for 2 s
  • Module keying: Electronic, software configurable
  • RTB keying: User-defined mechanical
  • Slot width: 1
  • Wire category: 2?
  • North American temperature code: T4A
  • IEC temperature code: T4
  • Enclosure type: None (open-style)

NOTE:
  1. Notch filter dependent.
  2. Use this conductor category information for planning conductor routing as described in the system-level installation manual.

  • Estimated Lead Time: 6 - 8 Weeks
  • Shipping Weight: 2 Kg

Recently Viewed Items