1771-OW16 | Allen Bradley 1771 Digital Relay Contact Output Module
1771-OW16 | Allen Bradley 1771 Digital Relay Contact Output Module

1771-OW16 | Allen Bradley 1771 Digital Relay Contact Output Module

0 Review(s)
Availability: Estimated Lead Time: 10 - 12 Weeks
Part Number: 1771-OW16
USD1,455.00
Retail Price:USD1,712.00
You Save:USD257.00(15%)
Write a Review
Part Number : 1771-OW16

Model1771-OW16
Output per module16
Module Location 
1771 -A1B thru -A4B I/O Chassis; 1771 -AM1 or AM2
Voltage Rating24-250V ac (rms), 47-63Hz; 24-150V dc
Power Rating?dc: 80 Watts per output (max); 1280 Watts per module (max)
ac: 500 VA per output (max); 1440 VA per module (max)
cos 0.4
Current Rating (maximum per channel)?
ac: 2A per output at rated power
dc: 2A per output at 40V; 1A per output at 150V
0.5A per output at 100V; 0.25A per output at 150V
Maximum Surge Currentdc: 2A maximum per output (at rated power);
ac: Refer to Table A below
Minimum Contact Load10 mA
Operate/Release Time10ms maximum; 5ms (?1ms) typical
Bounce Time Maximum
4ms
Switching Frequency Maximum
1/3 Hz @maximum load
Expected Life of Electrical Contacts300K operations @ 25?C (cos 1)
Power Dissipation
All relays off: 0.015 Watts; All relays on: 6.55 Watts
Thermal DissipationAll relays off: 0.05 BTU/hr; All relays on: 22.24 BTU/hr
Backplane Current1.3A maximum
Maximum Cable Length1000ft (304.8m)
Isolation Voltage1500V ac for 1 second customer side to system side;
1500V ac for 1 second channel to channel;
relay rated 4000V coil to contact
Conductors
                            Wire Size:

                            Category:

14 gauge (2mm?) stranded maximum?

3/64 inch (1.2mm) insulation maximum
1
4

Environmental Conditions
                    Operational Temp.
                    Storage Temperature
                    Relative Humidity

0? to 6
0?C (32? to 140?F)
-4
0? to 85?C (-40? to 185?F)
5 to 95% (without condensation)
KeyingBetween 2 and 4
Between 32 and 34
Field Wiring ArmCatalog Number 1771-WN
Wiring Arm Screw Torque7-9 inch-pounds
Agency Certification (when product or packaging is marked) CSA certified
CSA Class I, Division 2, Groups A, B, C, D certified
UL listed
CE marked for all applicable directives
Installation data1771-2.206

(1) An individual output should not be subjected to high power loads and then be required to run low power loads.
(2) Output current maximum per module is limited by the maximum output power rating.
(3) 14 gauge wire connected to all terminals may not allow the field wiring arm cover to close. A smaller wire size may be required.
(4) You use this conductor category information for planning conductor routing as described in the system-level installation manual.


  • Estimated Lead Time : 10 - 12 Weeks
  • Shipping Weight : 2.5 Kg
  • Recently Viewed Items