5301HA1H1N4AM00158CBNAM1P1C1Q4Q8S3SW2J0 | Rosemount 5300 Level Transmitter
5301HA1H1N4AM00158CBNAM1P1C1Q4Q8S3SW2J0 | Rosemount 5300 Level Transmitter

5301HA1H1N4AM00158CBNAM1P1C1Q4Q8S3SW2J0 | Rosemount 5300 Level Transmitter

0 Review(s)
Availability: Estimated Lead Time: 8 - 10 Weeks
Part Number: 5301HA1H1N4AM00158CBNAM1P1C1Q4Q8S3SW2J0
USD5,026.00
Retail Price:USD7,180.00
You Save:USD2,154.00(30%)
Write a Review
Part Number: 5301HA1H1N4AM00158CBNAM1P1C1Q4Q8S3SW2J0
Model: 5300 Level Transmitter
Manufacturer: Rosemount
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information

Model 5301 Guided Wave Radar Liquid Level or Interface Transmitter (interface available for fully submerged probe)
Signal output H 4-20 mA with HART communication (default output from factory is HART 5, add option code HR7 for HART 7)
Housing material  A Polyurethane-covered Aluminum (Aluminum alloy A360, maximum 0.6 percent Cu) 
Conduit / cable threads 1 ½ - 14 NPT, 1 plug included
Operating temperature and pressure H(1)(2) Design and operating temperature:
-76 to 752 °F (-60 to 400 °C)
-15 to 5000 psig (-1 to 345 bar) 
Material of construction: Process connection / probe 1 316/316L/EN 1.4404
Sealing O-ring material  N(3) None
Probe type 4A Description: Rigid Single Lead (8 mm)
Process connections: Flange / 1- in.(4), 1½-in., 2- in.(4) Thread / Tri Clamp
Probe lengths: Min: 1 ft. 4 in. (0.4 m), Max: 9 ft. 10 in. (3 m)
Probe length units M Metric (meters, centimeters) 
Total probe length (feet/m)  001
Total probe length (inch/cm)  58
Process connection - size / type CB 4-in. Class 300, RF (Raised Face Type)
Hazardous locations certifications NA No Hazardous Locations Certifications
Display M1 Integral digital display 
Hydrostatic testing P1 Hydrostatic testing, including certificate 
Factory configuration  C1 Factory configuration per Configuration Data Sheet
Special quality assurance Q4 Calibration data certificate
Material traceability certification  Q8 Material traceability certification consistent with ISO10474-3.1:2013 / EN10204-3.1:2004 
Centering discs S3(5) Description: 3-in. Centering disc
Outer diameter: 2.7 in. (68 mm)

SW2
J0

  1. Requires option None for sealing (no O-ring).
  2. For applications where a large amount of contamination is present a standard or high pressure seal should be used, if process conditions allow.
  3. Requires Operating Temperature and Pressure code H, P, or C.
  4. Only available with Operating Temperature and Pressure code S.
  5. Available for SST, Alloy C-276, Alloy 400, Alloy 825, and Duplex 2205 probes, type 2A, 4A, 4B, 4S, and 5A. Same disc material as probe material.


  • Estimated Lead Time: 8 - 10 Weeks
  • Shipping Weight: 25 Kg

Recently Viewed Items