EJA110E-FVS4C-919DN/KF25/M11/T12 | Yokogawa EJA110E Differential Pressure Transmitter
EJA110E-FVS4C-919DN/KF25/M11/T12 | Yokogawa EJA110E Differential Pressure Transmitter

EJA110E-FVS4C-919DN/KF25/M11/T12 | Yokogawa EJA110E Differential Pressure Transmitter

0 Review(s)
Availability: Estimated Lead Time: 10 - 12 Weeks
Part Number: EJA110E-FVS4C-919DN/KF25/M11/T12
USD1,984.00
Retail Price:USD2,834.00
You Save:USD850.00(30%)
Write a Review
Part Number: EJA110E-FVS4C-919DN/KF25/M11/T12
Model: EJA110E Differential Pressure Transmitter
Manufacturer: Yokogawa
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

EJA110E features include:
  • 0.055% Accuracy (0.04% Accuracy optional)
  • 0.1% Stability per 10 years
  • 90 ms Response Time
  • Exida and TUV SIL 2 / SIL3 Certified
  • MWP 2,300 psi (MWP 3,600 psi option)
  • Local Parameter Setting (LPS)

Ordering Information

Model EJA110E Differential pressure transmitter
Output signal -F Digital communication (FOUNDATION Fieldbus protocol, refer to GS 01C31T02-01EN)
Measurement span (capsule) V 0.14 to 14 MPa (20 to 2000 psi)
Wetted parts material(1) S# Cover flange and process connector: ASTM CF-8M(2)(3)
Capsule: Hastelloy C-276(4) (Diaphragm), F316L SST, 316L SST (Others)
Capsule gasket: Teflon-coated 316L SST
Vent/Drain plug: 316 SST
Process connections 4 with 1/2 NPT female process connector
Bolts and nuts material C 660 SST
Installation -9 Horizontal piping and left side high pressure
Amplifier housing 1 Cast aluminum alloy
Electrical connection 9 M20 female, two electrical connections and a blind plug(5)
Integral indicator D Digital indicator(6)
Mounting bracket N None

/KF25
Material certificate(7) /M11 Cover flange, Process connector(8)
Pressure test/ Leak test certificate(9) /T12 Test Pressure: 16 MPa(2300 psi)

Nitrogen(N2) Gas(10)
Retention time: one minute

The “*” marks indicate the most typical selection for each specification.
  1. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids.
  2. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.
  3. Cast version of 316 SST. Equivalent to SCS14A.
  4. Intergranular corrosion test passed according to ASTM A262 Practice E.
  5. Material of a blind plug is aluminum alloy or 304 SST.
  6. Not applicable for output signal code G.
  7. Material traceability certification, per EN 10204 3.1B.
  8. Applicable for process connections codes 1, 2, 3, and 4.
  9. The unit on the certificate is always Pa unit regardless of selection of option code D1, D3 or D4.
  10. Pure nitrogen gas is used for oil-prohibited use (option codes K1, K2, K5, and K6).


NOTE:
This item is a replacement of EJA110A-FVS4C-99DN/KF25/M11/T12


  • Estimated Lead Time: 10 - 12 Weeks
  • Shipping Weight: 8 Kg

Recently Viewed Items