EJA110E-JMH4G-322DD/KS21 | Yokogawa EJA110E Differential Pressure Transmitter
EJA110E-JMH4G-322DD/KS21 | Yokogawa EJA110E Differential Pressure Transmitter

EJA110E-JMH4G-322DD/KS21 | Yokogawa EJA110E Differential Pressure Transmitter

0 Review(s)
Availability: Estimated Lead Time: 8 - 10 Weeks
Part Number: EJA110E-JMH4G-322DD/KS21
USD1,687.00
Retail Price:USD2,411.00
You Save:USD724.00(30%)
Write a Review
Part Number: EJA110E-JMH4G-322DD/KS21

Model and Suffix Codes
  • Model: EJA110E - Differential pressure transmitter
  • Output signal: -J - 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)?
  • Measurement span (capsule): 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material?: H
    Cover flange and process connector: ASTM CF-8M?
    Capsule: Hastelloy C-2764 (Diaphragm)
    Capsule gasket: PTFE Teflon
    Vent/Drain plug: 316 SST
  • Process connections: with 1/2 NPT female process connector
  • Bolts and nuts material: G - 316L SST
  • Installation: -3 
  • Amplifier housing: 2 ASTM CF-8M stainless steel6
  • Electrical connection: 1/2 NPT female, two electrical connections without blind plugs plug5
  • Integral indicator: Digital indicator5
  • Mounting bracket: 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Optional Codes: /KS21 - ATEX
    ATEX Intrinsically safe Approval7,8
        Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-11:2012, EN 60079-26:2007
        Certificate: DEKRA 11ATEX0228 X
        II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85?C T100?C T120?C Db
        Degree of protection: IP66/IP67
        Amb. Temp. (Tamb) for EPL Ga: ? to 60?C (? to 140?F)
        Maximum Process Temp. (Tp) for EPL Ga:120?C
        Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0 ?H
        Amb. Temp. for EPL Db: ? to 60?C9
        Max. surface Temp. for EPL Db: T85?C (Tp: 80?C), T100?C (Tp: 100?C), T120?C (Tp: 120?C) 

NOTE:
The " * " marks indicate the most typical selection for each specification.
  1. HART 5 or HART 7 is selectable. Specify upon ordering.
  2. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user s process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above). Contact Yokogawa for detailed information of the wetted parts material.
  3. Cast version of 316 SST. Equivalent to SCS14A.
  4. Hastelloy C-276 or ASTM N10276.
  5. Not applicable for output signal code G.
  6. Not applicable for electrical connection code 0, 5, 7 and 9.
  7. Applicable for Electrical connection code 2, 4, 7, 9, C and D.
  8. Not applicable for output signal code Q.
  9. Lower limit of ambient temperature is ??C (5?F) when option code HE is specified.

  • Estimated Lead Time: 8 - 10 Weeks
  • Shipping Weight: 5 Kg

Recently Viewed Items