EJA110E-JMS4G-712DD/D4 | Yokogawa EJA110E Differential Pressure Transmitter
EJA110E-JMS4G-712DD/D4 | Yokogawa EJA110E Differential Pressure Transmitter

EJA110E-JMS4G-712DD/D4 | Yokogawa EJA110E Differential Pressure Transmitter

0 Review(s)
Availability: Estimated Lead Time: 8 - 10 Weeks
Part Number: EJA110E-JMS4G-712DD/D4
USD1,090.00
Retail Price:USD1,557.00
You Save:USD467.00(30%)
Write a Review
Part Number: EJA110E-JMS4G-712DD/D4
Model: EJA110E Differential Pressure Transmitter
Manufacturer: Yokogawa

Model and Suffix Codes
  • Model: EJA110E - Differential pressure transmitter
  • Output signal: -J - 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)1
  • Measurement span (capsule): 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material2S
    Cover flange and process connector: ASTM CF-8M3
    Capsule: Hastelloy C-2764 (Diaphragm); F316L SST, 316L SST (Others)
    Capsule gasket: Teflon-coated 316L SST
    Vent/Drain plug: 316 SST
  • Process connections: with 1/2 NPT female process connector
  • Bolts and nuts material: G - 316L SST
  • Installation: -Vertical piping, left side high pressure, and process connection downside
  • Amplifier housing: Cast aluminum alloy
  • Electrical connection: 1/2 NPT female, two electrical connections without blind plugs plug5
  • Integral indicator: Digital indicator5
  • Mounting bracket: 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Optional Codes: /D4 - Calibration Unit6 - M calibration (kgf/cm² unit)

NOTE:
The " * " marks indicate the most typical selection for each specification.
  1. HART 5 or HART 7 is selectable. Specify upon ordering.
  2. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user s process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.
  3. Cast version of 316 SST. Equivalent to SCS14A.
  4. Hastelloy C-276 or ASTM N10276.
  5. Not applicable for output signal code G.
  6. The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.

  • Estimated Lead Time: 8 - 10 Weeks
  • Shipping Weight: 8 Kg

Recently Viewed Items