EJA110E-JMS4G-917NB/D4/HAC/HE | Yokogawa EJA110E Differential Pressure Transmitter
EJA110E-JMS4G-917NB/D4/HAC/HE | Yokogawa EJA110E Differential Pressure Transmitter

EJA110E-JMS4G-917NB/D4/HAC/HE | Yokogawa EJA110E Differential Pressure Transmitter

0 Review(s)
Availability: Estimated Lead Time: 7 - 8 Months
Part Number: EJA110E-JMS4G-917NB/D4/HAC/HE
USD1,276.00
Retail Price:USD1,823.00
You Save:USD547.00(30%)
Write a Review
Part Number: EJA110E-JMS4G-917NB/D4/HAC/HE
Model: EJA110E Differential Pressure Transmitter
Manufacturer: Yokogawa
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

EJA110E features include:
  • 0.055% Accuracy (0.04% Accuracy optional)
  • 0.1% Stability per 10 years
  • 90 ms Response Time
  • Exida and TUV SIL 2 / SIL3 Certified
  • MWP 2,300 psi (MWP 3,600 psi option)
  • Local Parameter Setting (LPS)

Ordering Information

Model EJA110E Differential pressure transmitter
Output signal -J 4 to 20 mA DC with digital communication (BRAIN protocol)(1)
Measurement span (capsule) M 1 to 100 kPa (4 to 400 inH2O)
Wetted parts material(2) S# Cover flange and process connector: ASTM CF-8M(3)
Capsule: Hastelloy C-276(4) (Diaphragm), F316L SST, 316L SST (Others)
Capsule gasket: Teflon-coated 316L SST
Vent/Drain plug: 316 SST
Process connections 4 with 1/2 NPT female process connector
Bolts and nuts material G 316L SST
Installation -9 Horizontal piping and left side high pressure
Amplifier housing 1 Cast aluminum alloy
Electrical connection 7 1/2 NPT female, two electrical connections and a blind plug(4)
Integral indicator N None
Mounting bracket B 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
Calibration units(5) /D4 M calibration (kgf/cm² unit)
High accuracy type(6)(7) /HAC High accuracy
Fluoro-rubber O-ring /HE All O-rings of amplifier housing. Lower limit of ambient temperature: –15°C (5°F)

The “*” marks indicate the most typical selection for each specification.
  1. HART 5 or HART 7 is selectable. Specify upon ordering.
  2. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids.
    Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.
  3. Cast version of 316 SST. Equivalent to SCS14A.
  4. Material of a blind plug is aluminum alloy or 304 SST.
  5. The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.
  6. Applicable for capsule code M, H and V when combined with wetted parts material code S.
  7. Not applicable for output signal code Q.


  • Estimated Lead Time: 7 - 8 Months
  • Shipping Weight: 8 Kg

Recently Viewed Items