EJA130E-JMS5G-917DJ/KF22/A/D4 | Yokogawa EJA130E Differential Pressure Transmitter
EJA130E-JMS5G-917DJ/KF22/A/D4 | Yokogawa EJA130E Differential Pressure Transmitter

EJA130E-JMS5G-917DJ/KF22/A/D4 | Yokogawa EJA130E Differential Pressure Transmitter

0 Review(s)
Availability: Estimated Lead Time: 24 - 28 Weeks
Part Number: EJA130E-JMS5G-917DJ/KF22/A/D4
Retail Price:USD1,966.00
You Save:USD590.00(30%)
Write a Review
Product Number: EJA130E-JMS5G-917DJ/KF22/A/D4
Model: EJA130E Differential Pressure Transmitter
Brand: Yokogawa
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

EJA130E features include
  • ± 0.055% Accuracy
  • ± 0.1% Stability per 10 years
  • 150 ms Response Time
  • 4,500 psi MWP
  • Exida and TUV SIL 2/3 Certified
  • Local Parameter Setting (LPS)

Model and Suffix Codes

ModelEJA130EDifferential pressure transmitter
Output signal-J4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)(1)
Measurement span (capsule)M1 to 100 kPa (4 to 400 inH2O)
Wetted parts material(2)S#Cover flange: F316 SST
Process connector: ASTM CF-8M(3)
Capsule: Hastelloy C-276(4) (Diaphragm); F316L SST, 316L SST (Others)
Capsule gasket: Teflon-coated 316L SST
Vent/Drain plug: 316 SST
Process connections*5without process connector (1/4 NPT female on the cover flanges)
Bolts and nuts materialG316L SST
Installation*-9Horizontal piping and left side high pressure
Amplifier housing1Cast aluminum alloy
Electrical connection71/2 NPT female, two electrical connections and a blind plug(5)
Integral indicatorDDigital indicator(6)
Mounting bracketJ316 SST 2-inch pipe mounting, flat type (for horizontal piping)
ATEX/KF22ATEX Flameproof Approval(7)
   Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-1:2007 (“2014” from August 1, 2017),
   EN 60079-31:2014
   Certificate: KEMA 07ATEX0109 X
   II 2G, 2D Ex d IIC T6...T4 Gb (“Ex db IIC T6...T4 Gb” from August 1, 2017), Ex tb IIIC T85°C Db
   Degree of protection: IP66/IP67
   Amb. Temp. (Tamb) for gas-proof :
   T4; –50 to 75°C (–58 to 167°F), T5; –50 to 80°C (–58 to 176°F), T6; –50 to 75°C (–58 to 167°F)
   Process Temp. for gas-proof (Tp):
   T4; –50 to 120°C (–58 to 248°F), T5; –50 to 100°C (–58 to 212°F), T6; –50 to 85°C (–58 to 185°F)
   Max. surface Temp. for dust-proof: T85°C (Tamb: –30 to 75°C, Tp: –30 to 85°C)(8)
Lightning protector/ATransmitter power supply voltage: 10.5 to 32 V DC (10.5 to 30 V DC for intrinsically safe type.)
Allowable current: Max. 6000 A (1×40 µs), Repeating 1000 A (1×40 µs) 100 times
Applicable Standards: IEC 61000-4-4, IEC 61000-4-5
Calibration units(9)/D4M calibration (kgf/cm² unit)

The “*” marks indicate the most typical selection for each specification.
  1. HART 5 or HART 7 is selectable. Specify upon ordering.
  2. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids.
  3. Cast version of 316 SST. Equivalent to SCS14A.
  4. Hastelloy C-276 or ASTM N10276.
  5. Material of a blind plug; aluminum alloy for code 5 and 9, and SUS304 for code 7.
  6. Not applicable for output signal code G.
  7. Applicable for Electrical connection code 2, 4, 7, 9, C and D.
  8. Lower limit of ambient temperature is –15°C (5°F) when /HE is specified.
  9. The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.

  • Estimated Lead Time: 24 - 28 Weeks
  • Shipping Weight: 6 Kg

Recently Viewed Items