EJA210E-DHS5J-912EN-WD23A2SW00-B/D3 | Yokogawa EJA210E Flange Mounted Differential Pressure Transmitter
EJA210E-DHS5J-912EN-WD23A2SW00-B/D3 | Yokogawa EJA210E Flange Mounted Differential Pressure Transmitter

EJA210E-DHS5J-912EN-WD23A2SW00-B/D3 | Yokogawa EJA210E Flange Mounted Differential Pressure Transmitter

0 Review(s)
Availability: Estimated Lead Time: 8 - 10 Weeks
Part Number: EJA210E-DHS5J-912EN-WD23A2SW00-B/D3
USD1,278.00
Retail Price:USD1,826.00
You Save:USD548.00(30%)
Write a Review
Part Number: EJA210E-DHS5J-912EN-WD23A2SW00-B/D3

Ordering Information
  • Model: EJA210EFlange mounted differential pressure transmitter
  • Output Signal: -D4 to 20 mA DC with digital communication (BRAIN protocol)
  • Measurement span (capsule): H5 to 500kPa (20 to 2000 inH2O)
  • Low pressure side wetted parts material: S[Cover flange and process connector] ASTM CF-8M?; [Capsule] Hastelloy C-276? (Diaphragm) F316L SST, 316L SST (Others); [Capsule gasket] Teflon-coated 316L SST; [Drain/Vent plug] 316 SST
  • Low pressure side Process connections:  5 - without process connector (1/4 NPT female on the cover flange)
  • Coverflange bolts and nuts material: JB7 carbon steel
  • Installation: -9Horizontal piping type and left side high pressure
  • Amplifier housing: 1 - Cast aluminum alloy
  • Electrical connection: 21/2 NPT female, two electrical connections without blind plugs
  • Integral Indicator: E -Digital indicator with the range setting switch (push button)?
  • Nalways N
  • Process connection style: WFlush type
  • Flange rating: D2DIN PN10/16
  • Flange size: 33-inch (80mm)
  • Flange material: AJIS S25C
  • Gasket contact surface4: 2 - Flat (no serration)
  • Wetted parts material (high pressure side)5: SW[Diaphragm] 316L SST; [Others] 316 SST
  • Flushing connection ring6: 0 None
  • Extension: 0None
  • Fill fluid:  -B - For general use (Silicone oil) [Pressure temperature] 40 to 120?C; [Ambient temperature]  40 to 85?C
  • Calibration unit7: /D3bar calibration (bar unit)

NOTE:
  1. Cast version of 316 SST. Equivalent to SCS14A.
  2. Hastelloy C-276 or ASTM N10276
  3. Not applicable for output signal code F.
  4. See Table 3 Gasket contact surface on Page 5.
  5. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user s process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above). Contact Yokogawa for detailed information of the wetted parts material.
  6. When specified flushing connection ring code A or B, exclusive gasket is provided for transmitter side.
  7. The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option code D1, D3, and D4.

  • Estimated Lead Time: 8 - 10 Weeks
  • Shipping Weight: 10 Kg

Recently Viewed Items