EJA430A-EAS5A-94DB/M01/T03/N4/D3 | Yokogawa EJA430A Gauge Pressure Transmitter
EJA430A-EAS5A-94DB/M01/T03/N4/D3 | Yokogawa EJA430A Gauge Pressure Transmitter

EJA430A-EAS5A-94DB/M01/T03/N4/D3 | Yokogawa EJA430A Gauge Pressure Transmitter

0 Review(s)
Availability: Estimated Lead Time: 10 - 12 Weeks
Part Number: EJA430A-EAS5A-94DB/M01/T03/N4/D3
Retail Price:USD818.00
You Save:USD123.00(15%)
Write a Review
Part Number: EJA430A-EAS5A-94DB/M01/T03/N4/D3

Model and Suffix Codes
  • Model: EJA430A - Gauge Pressure Transmitter
  • Output Signal: -E - 4 to 20 mA DC with digital communication (BRAIN protocol)
  • Measurement span (capsule): A - 0.03 to 3 MPa {0.3 to 30 kgf/cm?} {4.3 to 430 psi} {0.3 to 30 bar}
  • Wetted parts material1: S# - [Body]SCS14A; [Capsule] SUS316L3; [Vent plug] SUS3164
  • Process connections: 5without process connector (1/4 NPT female on the cover flanges)
  • Bolts and nuts material: ASCM435: 3 MPa {30 kgf/cm?} (A capsule); 14 MPa {140 kgf/cm?}
  • Installation: -9Horizontal impulse piping type, left side high pressure5
  • Electrical connection: 4M20 female, two electrical connections without blind plug
  • Integral indicator: DDigital indicator
  • Mounting bracket: BSUS304 - 2-inch pipe mounting (flat type)
  • Mill Certificate: /M01Cover flange6
  • Pressure test/Leak test Certificate7: /T03Test Pressure: 3 MPa{30 kgf/cm?}8; Nitrogen(N2) Gas9
  • Wired tag plate: /N4Stainless steel tag plate wired onto transmitter
  • Calibration unit10: /D3bar calibration (bar unit)

The marks indicate the most typical selection for each specification.
The # marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of SUS316 material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.

  1. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user s process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above). Contact Yokogawa for detailed information of the wetted parts material.
  2. Indicates high pressure side cover flange and process connector material. Material of low pressure side cover flange (open to atmosphere) is SCS14A.
  3. Diaphragm material is Hastelloy C-276 or ASTM N10276. Other capsule wetted parts materials are SUSF316L, SUS316L or ASTM grade 316L.
  4. SUS316 or ASTM grade 316.
  5. If necessary, specify Mounting bracket code A, B or J.
  6. Applicable for Process connection code 0 and 5.
  7. The unit on the certificate is always MPa regardless of selection of option code D1, D3, or D4.
  8. Applicable for Capsule code A.
  9. Pure nitrogen gas is used for oil-prohibited use (Optional code K1, K2, K5, and K6).
  10. The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by Option code D1, D3 and D4.

  • Estimated Lead Time: 10 - 12 Weeks
  • Shipping Weight: 6 Kg

Recently Viewed Items