Yokogawa EJA430E Gauge Pressure Transmitter

EJA430E-JAS4J-312DD/N4/HE | Yokogawa EJA430E Gauge Pressure Transmitter

Availability: Estimated Lead Time: 8 - 10 Weeks

Part Number: EJA430E-JAS4J-312DD/N4/HE

Your Price: USD1,203.00

Retail Price:USD1,718.00

You Save:USD515.00(30%)

Quantity

Write a Review

Product Number: EJA430E-JAS4J-312DD/N4/HE

Ordering Information

Model: EJA430E - Gauge pressure transmitter
Output signal: -J - 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)?
Measurement span (capsule): A - 0.03 to 3.5 MPa (4.3 to 500 psi)
Wetted parts material?: S -
[Cover flange and process connector] ASTM CF-8M?
[Capsule] Hastelloy C-276⁴ (Diaphragm); F316L SST, 316L SST (Others)
[Capsule gasket] Teflon-coated 316L SST
[Vent/Drain plug] 316 SST
Process connections: 4 - with 1/2 NPT female process connector
Bolts and nuts material: J - B7 carbon steel
Installation: -3 - Vertical piping, right side high pressure, and process connection down side
Amplifier housing: 1 - Cast aluminum alloy
Electrical connection: 2 - 1/2 NPT female, two electrical connections without blind plugs
Integral indicator: D⁵ - Digital indicator
Mounting bracket: D - 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
Optional Codes:
[Wired tag plate] /N4 - 316 SST tag plate wired onto transmitter
[Fluoro-rubber O-ring] /HE - All O-rings of amplifier housing. Lower limit of ambient temperature: 15?C (5?F)

NOTES:

The " * " marks indicate the most typical selection for each specification.

HART 5 or HART 7 is selectable. Specify upon ordering.
Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the users process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above). Contact Yokogawa for detailed information of the wetted parts material.
Cast version of 316 SST. Equivalent to SCS14A.
Hastelloy C-276 or ASTM N10276.
Not applicable for output signal code G.

EJA430E-JAS4J-312DD/N4/HE | Yokogawa EJA430E Gauge Pressure Transmitter