EJA430E-JBS5G-72DDK/KF22/M01/T12/D3 | Yokogawa EJA430E Gauge Pressure Transmitter
EJA430E-JBS5G-72DDK/KF22/M01/T12/D3 | Yokogawa EJA430E Gauge Pressure Transmitter

EJA430E-JBS5G-72DDK/KF22/M01/T12/D3 | Yokogawa EJA430E Gauge Pressure Transmitter

0 Review(s)
Availability: Estimated Lead Time: 12 Weeks
Part Number: EJA430E-JBS5G-72DDK/KF22/M01/T12/D3
USD1,335.00
Retail Price:USD1,907.00
You Save:USD572.00(30%)
Write a Review
Part Number: EJA430E-JBS5G-72DDK/KF22/M01/T12/D3
Model: Gauge Pressure Transmitter
Brand: Yokogawa
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information

Model EJA430E Gauge pressure transmitter
Output signal -J 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)(1)
Measurement span (capsule) B 0.14 to 16 MPa (20 to 2300 psi)
Wetted parts material(2) S# Cover flange and process connector: ASTM CF-8M(3)
Capsule: Hastelloy C-276(4) (Diaphragm); F316L SST, 316L SST (Others)
Capsule gasket: Teflon-coated 316L SST
Vent/Drain plug: 316 SST
Process connections 5 without process connector (1/4 NPT female on the cover flanges)
Bolts and nuts material G 316L SST
Installation -7 Vertical piping, left side high pressure, and process connection down side
Amplifier housing 2 ASTM CF-8M stainless steel(5)
Electrical connection D M20 female, two electrical connections and a 316 SST blind plug
Integral indicator D Digital indicator(6)
Mounting bracket K 316 SST or SCS14A 2-inch pipe mounting, L type (for vertical piping)
ATEX /KF22 ATEX Flameproof Approval(7)
  
Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-1:2007, EN 60079-31:2009
 Certificate: KEMA 07ATEX0109 X
 II 2G, 2D Ex d IIC T6...T4 Gb, Ex tb IIIC T85°C Db
 Degree of protection: IP66/IP67
 Amb. Temp. (Tamb) for gas-proof :
 T4; –50 to 75°C (–58 to 167°F), T5; –50 to 80°C (–58 to 176°F), T6; –50 to 75°C (–58 to 167°F)
 Process Temp. for gas-proof (Tp): –50 to T4; 120°C (248°F), T5; 100°C (212°F), T6; 85°C (185°F)
 Max. surface Temp. for dust-proof: T85°C (Tamb: –30 to 75°C, Tp: –30 to 85°C)(8)
Material certificate(9) /M10 Cover flange(10)
Pressure test/ Leak test certificate(11) /T12 Test Pressure: 16 MPa (2300 psi)(12)

Nitrogen(N2) Gas)(13)
Retention time: one minute
Calibration units(14) /D3 bar calibration (bar unit)

The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR0175/ISO 15156. Please refer to the latest standards for details. Selected materials also conform to NACE MR0103.
  1. HART 5 or HART 7 is selectable. Specify upon ordering.
  2. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids.
  3. Indicated material is equivalent to ASTM M35-2.
  4. Hastelloy C-276 or ASTM N10276.
  5. Not applicable for electrical connection code 0, 5, 7 and 9.
  6. Not applicable for output signal code G.
  7. Applicable for Electrical connection code 2, 4, 7, 9, C and D.
  8. Lower limit of ambient temperature is –15°C (5°F) when /HE is specified.
  9. Material traceability certification, per EN 10204 3.1B.
  10. Applicable for process connections code 0 and 5.
  11. The unit on the certificate is always Pa unit regardless of selection of option code D1, D3 or D4.
  12. Applicable for capsule code B.
  13. Pure nitrogen gas is used for oil-prohibited use (option codes K1, K2, K5, and K6).
  14. The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.


  • Estimated Lead Time: 12 Weeks
  • Shipping Weight: 6 Kg

Recently Viewed Items