Genuine & New Products | Factory Warranty | 30-Day Money-Back Guarantee | Worldwide Shipping | Affiliate Program

My Wish Lists
  1. Home
  2. Categories
  3. Transmitter
  4. EJX110A-EMS5G-912DB/FF1/D4/N4/T13/M01 | Yokogawa EJX110A Differential Pressure Transmitter
EJX110A-EMS5G-912DB/FF1/D4/N4/T13/M01 | Yokogawa EJX110A Differential Pressure Transmitter
EJX110A-EMS5G-912DB/FF1/D4/N4/T13/M01 | Yokogawa EJX110A Differential Pressure Transmitter

EJX110A-EMS5G-912DB/FF1/D4/N4/T13/M01 | Yokogawa EJX110A Differential Pressure Transmitter

0 Review(s)
Questions about this item? Be the first to ask here.
Availability: Estimated Lead Time: 16 - 20 Weeks
Part Number: EJX110A-EMS5G-912DB/FF1/D4/N4/T13/M01
USD1,830.00
Retail Price:USD2,614.00
You Save:USD784.00(30%)
Write a Review
Part Number: EJX110A-EMS5G-912DB/FF1/D4/N4/T13/M01
Model: EJX110A Differential Pressure Transmitter
Manufacturer: Yokogawa
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

The EJX-A series is Yokogawa's premium performance line of DPharp transmitters. Released in 2004, it offers the performance and stability needed in demanding applications. The EJX-A series performance makes it the thoroughbred of the DPharp family of pressure transmitters.

The EJX110A is the traditional-mount Differential Pressure Transmitter in the series.

EJX110A features include:
  • 0.04% Accuracy (0.025% Accuracy option available)
  • 0.1% per 15 years Stability
  • 90 ms Response Time
  • 3,600 psi MWP
  • Exida and TUV SIL2/SIL3 Certified
  • Local Parameter Setting (LPS)

Ordering Information

Model EJX110A Differential pressure transmitter
Output signal -E 4 to 20 mA DC with digital communication (HART 5 protocol)
Measurement span (capsule) M 0.5 to 100 kPa (2 to 400 inH2O)
Wetted parts material(1) S# Cover flange and process connector: ASTM CF-8M(2)
Capsule: Hastelloy C-276(3) (Diaphragm); F316L SST, 316L SST (Others)
Capsule gasket: Teflon-coated 316L SST
Vent/Drain plug:  316 SST
Process connections 5 without process connector (1/4 NPT female on the cover flanges)
Bolts and nuts material G 316L SST
Installation -9 Horizontal piping and left side high pressure
Amplifier housing 1 Cast aluminum alloy
Electrical connection 2 1/2 NPT female, two electrical connections without blind plugs
Integral indicator D Digital indicator(4)
Mounting bracket B 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
Factory Mutual (FM) /FF1 FM Explosionproof Approval(5)
   Applicable Standard: FM3600, FM3615, FM3810, ANSI/NEMA 250
   Explosionproof for Class I, Division 1, Groups B, C and D, Dust-ignitionproof for Class II/III, Division 1,
   Groups E, F and G, in Hazardous locations, indoors and outdoors (Enclosure: Type 4X)
   “FACTORY SEALED, CONDUIT SEAL NOT REQUIRED.”
   Temperature class: T6, Amb. Temp.: –40 to 60°C (–40 to 140°F) 
Calibration units(6) /D4 M calibration (kgf/cm² unit)
Wired tag plate(7) /N4 316 SST tag plate wired onto transmitter
Pressure test/ Leak test certificate(8) /T13 Test Pressure: 25 MPa(3600 psi)(9)

Nitrogen(N2) Gas(10)
Retention time: one minute
Material certificate(11) /M01 Cover flange(12)

The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR0175/ISO15156. Please refer to the latest standards for details. Selected materials also conform to NACE MR0103.
The “*” marks indicate the most typical selection for each specification.
  1. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids.
    Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.
  2. Cast version of 316 SST. Equivalent to SCS14A.
  3. Hastelloy C-276 or ASTM N10276.
  4. Not applicable for output signal code G.
  5. Applicable for Electrical connection code 2, 4, 7, 9, C and D.
  6. The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.
  7. Maximum number of characters to be engraved on N4 tag plate is 16. Not applicable when option code V1U1 is specified.
  8. The unit on the certificate is always Pa unit regardless of selection of option code D1, D3 or D4.
  9. Applicable for capsule codes M, H and V when combined with Wetted Parts Material code S.
  10. Pure nitrogen gas is used for oil-prohibited use (option codes K1, K2, K5, and K6).
  11. Material traceability certification, per EN 10204 3.1B.
  12. Applicable for process connections codes 0 and 5.


  • Estimated Lead Time: 16 - 20 Weeks
  • Shipping Weight: 6 Kg

Recently Viewed Items

Share |