GE Fanuc PACSystems RX3i Universal Analog Input Module

IC695ALG600 | GE Fanuc PACSystems RX3i Universal Analog Input Module

Availability: In stock. Usually Ships in 1 - 7 Working Days.

Part Number: IC695ALG600

Your Price: USD1,366.00

Retail Price:USD1,951.00

You Save:USD585.00(30%)

Quantity

Write a Review

Part Number: IC695ALG600

Model: PACSystems RX3i Universal Analog Input Module

Manufacturer: GE Fanuc

Condition: New & Original in Factory Packing

Factory Warranty: 12 Months

Channels can be individually-configured using the Machine Edition software for:

Any combination of up to 8 channels of voltage, current, thermocouple, RTD, and resistance inputs.
Thermocouple Inputs: B, C, E, J, K, N, R, S, T
RTD Inputs: PT 385 / 3916, N 618 / 672, NiFe 518, CU 426
Resistance Inputs: 0 to 250 / 500 / 1000 / 2000 / 3000 / 4000 Ohms
Current: 0–20 mA, 4–20 mA, +20 mA
Voltage: +50mV, +150 mV, 0–5 V, 1–5 V, 0–10 V, +10V

Module Features:

Completely software-configurable, no module jumpers to set
Six hardware analog-to-digital filter frequencies, individually-selectable by channel
Rapid channel acquisition times based on filter frequency
Full autocalibration
On-board error-checking
Open-circuit detection for most input types
Short-circuit detection for RTDs.
User-defined scaling
High alarm, low alarm, high-high alarm, low-low alarm detection and reporting
Module fault reporting
Supports diagnostic point fault contacts in the logic program.
Flash memory for future upgrades
Module Status, Field Status, and TB LEDs
CJC compensation on terminal block
Temperature in Celsius or Fahrenheit
Positive and negative Rate of Change Alarms
Configurable software filters for each input channel
Configurable interrupts for channel alarms and faults
Terminal Block insertion or removal detection

IC695ALG600 | GE Fanuc PACSystems RX3i Universal Analog Input Module