Metrix ST5484E Seismic Velocity Transmitter

ST5484E-151-132-XX-M1376 | Metrix Seismic Velocity Transmitter

Availability: Estimated Lead Time: 3 - 5 Weeks

Part Number: ST5484E-151-132-XX-M1376

Your Price: USD1,785.00

Retail Price:USD2,550.00

You Save:USD765.00(30%)

Quantity

Write a Review

Product Number: ST5484E-151-132-XX-M1376

Model: Seismic Velocity Transmitter

Brand: Metrix

Ordering Information

Model: ST5484E - Seismic Velocity 4-20 mA Velocity Transmitter
Full Scale Range¹: 151 - 1.0 in/sec (25.4 mm/s) true RMS
Housing Material & Stud Size¹: 1 - 303 SS housing, ½” NPT stud
Hazardous Area Certification^2,3,4: 3 - ATEX, EEx ia IIC T4 Ga (intrinsically safe)
Connection Type²: 2 - Terminal Block, 2-wire6 ; (4-20 mA output only)
High-Pass Filter: X - Custom (consult factory)⁵
Low-Pass Filter: X - Custom (consult factory)⁵
M1370

NOTES:

The ST5484E uses an RMS amplitude detection circuit. Full scale ranges in peak units use scaled RMS (i.e., RMS x v2). The “derived peak” measurements will equal true peak only under the special case of a pure sinusoid, not complex vibration signals.
Hazardous Area Certifications are not compatible with all connection types. Consult Table 3 for allowable combinations of C & D options.
Some approvals require intrinsic safety barriers, others require Explosion-Proof wiring practices.
ATEX/IECEx/INMETRO Ex d (flameproof) approvals (ordering option C=8 or C=6) require conduit elbow 8200-AAA-IEC, sold separately.
High- and Low-Pass filter corners for standard filters must be separated by at least one octave (low-pass frequency must be at least twice the high-pass frequency). All combinations are allowed except E = 6 and F = 4, 5, or 6. Custom filters with closer separation and/or different roll-offs may be available in some instances. Consult the factory if custom filters are required.

ST5484E-151-132-XX-M1376 | Metrix Seismic Velocity Transmitter