STD725-E1AC4AS-1-0-AH0-11S-A-10A0 | Honeywell STD725 Differential Pressure Transmitter
STD725-E1AC4AS-1-0-AH0-11S-A-10A0 | Honeywell STD725 Differential Pressure Transmitter

STD725-E1AC4AS-1-0-AH0-11S-A-10A0 | Honeywell STD725 Differential Pressure Transmitter

0 Review(s)
Availability: Estimated Lead Time: 12 - 16 Weeks
Part Number: STD725-E1AC4AS-1-0-AH0-11S-A-10A0
Retail Price:USD930.00
You Save:USD204.00(22%)
Write a Review
Part Number: STD725-E1AC4AS-1-0-AH0-11S-A-10A0
Model: STD725 SmartLine Differential Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

  • Accuracies up to 0.05% of span
  • Stability up to 0.020% of URL per year for 10 years
  • Automatic static pressure & temperature compensation
  • Rangeability up to 100:1
  • Response times as fast as 100ms
  • Easy to use and intuitive display capabilities
  • Intuitive External Zero, Span and configuration capability
  • Comprehensive on-board diagnostic capabilities
  • Integral Dual Seal design for highest safety based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.0
  • World class overpressure protection
  • Full compliance to SIL 2/3 requirements.
  • Modular design characteristics

Ordering Information

Model STD725 Differential Pressure Transmitter
Process Wetted Heads & Diaphragm Materials E Process Head Material:316 Stainless Steel
Diaphragm Material: 316L Stainless Steel
Fill Fluid 1 Silicone Oil 200
Process Connection A None
None (1/4" NPTF female thread Std) 
Bolt/Nuts Materials C Carbon Steel
Vent/Drain Type/Location 4 Head Type: Dual Ended
Vent Type: Standard Vent
Location: End
Vent Material: Matches Head Material(1)
Gasket Materials A Teflon® or PTFE (Glass Filled)
Static Pressure S Standard Static Pressure - 4500 psig (315 bar)
Head/Connect Orientation 1 Standard, High Side Left, Low Side Right(2) / Std Head Orientation
Approvals 0 No Approvals Required
Electronic Housing Material & Connection Type A Material: Polyester Powder Coated Aluminum
Connection: 1/2 NPT
Lighting Protection: None
Output/Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections 0 Indicator: None
Ext Zero, Span & Config Buttons: None
Languages: None
Application Software 1 Diagnostics: Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 1 Write Protect: Enabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3)
General Configuration S Factory Standard
Accuracy and Calibration A Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration
Mounting Bracket 1 Bracket Type: Angle Bracket
Material: Carbon Steel
Customer Tag 0 No customer tag
Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required

  1. Except Carbon Steel Heads shall use 316SS Vent/Drain, Plugs & Adapters when required
  2. Left side/Right side as viewed from the customer connection perspective
  3. NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc

NOTE: This transmitter is a replacement of STD924-E1H-00000-MB

  • Estimated Lead Time: 12 - 16 Weeks
  • Shipping Weight: 6 Kg

Recently Viewed Items