STG74S-E1G000-1-0-CHT-11C-B-30A6-F1,FX,TP-0000 | Honeywell SmartLine STG700 Gauge Pressure Transmitters
STG74S-E1G000-1-0-CHT-11C-B-30A6-F1,FX,TP-0000 | Honeywell SmartLine STG700 Gauge Pressure Transmitters

STG74S-E1G000-1-0-CHT-11C-B-30A6-F1,FX,TP-0000 | Honeywell SmartLine STG700 Gauge Pressure Transmitters

0 Review(s)
Availability: Estimated Lead Time: 12 - 18 Weeks
Part Number: STG74S-E1G000-1-0-CHT-11C-B-30A6-F1,FX,TP-0000
USD1,126.00
Retail Price:USD1,609.00
You Save:USD483.00(30%)
Write a Review
Part Number: STG74S-E1G000-1-0-CHT-11C-B-30A6-F1,FX,TP-0000
Model: STG74S SmartLine Gauge Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information

Model STG74S Gauge In-Line Pressure Transmitter
Process Head & Diaphragm Materials E Process Head/Reference Head Material:(1) 316 Stainless Steel
Barrier Diaphragm Material: 316L SS, Hastelloy C - 276
Fill Fluid 1 Silicone Oil 200
Process G Size/Type: 1/2" NPT (female)
Material: Same as Process Head(2)
Bolt/Nuts Materials 0 None
Vent/Drain Type/Location 0 Head Type: None
Vent Type: None
Location: None
Vent Material: None
Gasket Materials 0 None
Head/Connect Orientation 1 Meter Body: Standard
High Side Left, Ref Side Right(3) / Std Head Orientation
Approvals 0 No Approvals Required
Electronic Housing Material & Connection Type C Material: Polyster Poweder Coated Aluminum
Connection: 1/2 NPT
Lighting Protection: Yes
Output/Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections T Indicator: Standard(w/Internal Zero,Span&Config buttons)
Ext Zero, Span & Config Buttons: Yes
Languages: EN
Application Software 1 Diagnostics: Standard Diagnostics
Output Limit, Failsafe % Write Protect Settings 1 Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits:(4) Honeywell Std (3.8 - 20.8 mAdc)
General Configuration C Custom Configuration (Unit Data Required from customer)
Accuracy & Calibration B Accuracy: Standard
Calibrated Range: Custom (Unit Data Required)
Calibration Qty: Single Calibration
Mounting Bracket 3 Bracket Type: Angle Bracket
Material: 316 SS
Customer Tag 0 No customer tag
Unassembled Conduit Plugs & Adapters A6 1/2 NPT 316 SS Certified Conduit Plug
Certifications & Warranty F1
FX
TP
Calibration Test Report & Certificate of Conformance
EN10204 Type 3.1 Material Traceability
Over-Pressure Leak Test Certificate (1.5X MAWP) 
Factory 0000 Factory Identification

  1. Reference head available with Dual Head Gage models only. In-Line Gage models are supplied with Process Head only.
  2. STG735,745,775 supplied via 1/2" flange adapter same material as process head except carbon steel shall use 316 SS
  3. Left side/Right side as viewed f rom the customer connection perspective
  4. NAMUR Output Limits are configurable by customer


  • Estimated Lead Time: 12 - 18 Weeks
  • Shipping Weight: 10 Kg

Recently Viewed Items